Compliant
|
ANSI T1.413 issue 2
|
|
ITU-T G.992.1 (G.dmt)
|
|
ITU-T G.992.2 (G.lite)
|
|
G.994.1 (G.hs, Multimode)
|
|
ITU-T G.992.3 (ADSL2 G.dmt.bis)
|
|
ITU-T G.992.4 (ADSL2 G.lite.bis)
|
|
ITU-T G.992.5 (ADSL2+, Annex A, B, L, M)
|
|
Reach Extended ADSL (RE ADSL)
|
ATM and PPP Protocols
|
Support up to 8PVCs
|
|
ATM Forum UNI 3.1/4.0 PVC
|
|
Multi Protocol over AAL5 (RFC1483 / 2684)
|
|
VC and LLC Multiplexing
|
|
PPP over Ethernet (RFC 2516)
|
|
PPP over ATM (RFC 2364)
|
|
Traffic Shaping (ATM QoS) UBR, CBR, VBR, VBR-rt, VBR-nrt
|
|
OAM F4 and F5 segment end-to-end loop-back, AIS, and RDI OAM cells
|
|
VPI is 0-255 and VCI is 32-65535
|
| Bridging / Routing |
Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1d)
|
|
IP routing-RIPv2 (backward compatible with RIPv1)
|
|
Static IP routing
|
|
Routing (TCP/IP/UDP/ARP/ICMP)
|
|
IP Multicast IGMP v1/v2
|
| IP Management |
NAT (Network Address Translation)
|
|
NAPT (Network Address and Port Translation)
|
|
DHCP Server / Relay / Client (WAN Port)
|
|
VPN (IPSec, PPTP, L2TP) Pass-Through
|
|
DNS Proxy
|
|
Dynamic DNS
|
|
UPnP support
|
|
Virtual Server (Port forwarding) and DMZ host
|
| Security |
PPP over PAP (Password Authentication Protocol; RFC1334)
|
|
PPP over CHAP (Challenge Authentication Protocol; RFC1994)
|
|
DoS Protection
|
|
Stateful Packet Inspection (SPI)
|
|
Built-in NAT Firewall
|
|
IP-based Packet filtering
|
|
Password Protected System Management
|
| HTTP Web-based management |
Web-based GUI Configuration / Management
|
|
CLI (Command Line Interface) via serial interface or Telnet over Ethernet
|
|
Telnet Remote Management
|
|
Firmware upgrade via FTP / TFTP
|
|
TR-069, CPE WAN Management Protocol (Optional)
|
|
Built-in Diagnostic tool
|
|
SNMP Support
|
Interface
|
One USB port compliant with USB v1.1, full speed (12Mbps)
|
|
Four RJ45 ports compliant with IEEE 802.3/802.3u, 10/100Mbps auto selection
|
|
One RJ11 port for ADSL connection
|
|
One reset button for restoration of factory default setting
|
|
One Power ON/OFF switch
|
| LED Indicators |
PWR, USB, LAN1, LAN2, LAN3, LAN4, ADSL
|
| Dimensions (app) |
155mm(length) x 101mm (width) x 32mm (height)
|
| Power Requirement |
Power Adapter: Input 110¡À10 or 230¡À10 VAC, Output 12VDC 1000mA
|
| Supported OS |
Windows 98SE, ME, 2000, XP, Vista, MAC OS X
|
| Environmental |
Operating temperature: 0¡ãC ~ 70¡ãC ambient
|
|
Humidity: 5 % ~ 95 % (non-condensing)
|
|
Storage temperature: -20¡ãC ~ 70¡ãC
|
| Certification |
FCC part 15, CE, LVD
|